Optimization of Drying Parameters for Minimization of Moisture Content in Black Tea Production

Authors

  • Bonface Ochieng Otedo School of Engineering and Built Environment, Department of Mechanical and Industrial Engineering, Masinde Muliro University of Science and Technology, Kakamega Kenya https://orcid.org/0009-0005-6540-0296
  • Peter Tumwet Cherop School of Engineering and Built Environment, Department of Mechanical and Industrial Engineering, Masinde Muliro University of Science and Technology, Kakamega Kenya https://orcid.org/0000-0002-8991-1972
  • Emmanuel Ebinga Osore School of Engineering and Built Environment, Department of Mechanical and Industrial Engineering, Masinde Muliro University of Science and Technology, Kakamega Kenya https://orcid.org/0000-0002-0943-0512

DOI:

https://doi.org/10.51867/scimundi.engineering.4.2.18

Keywords:

Dhool, Drying, Fluidized, Moisture, Optimum, Tea

Abstract

Study focuses on black tea drying process on fluidized bed dryer in tea factories. Tea drying variables considered in the study were air temperature, air velocity and time. The response variable in the experiment was the black tea moisture content. Air velocity was varied between 0.21 m/s and 0.55 m/s. Whereas air temperature was varied between 70 0C and 130 0C.  Drying time ranged between 0 minute and 20 minutes. Black tea drying experiment was conducted in the macerated tea laboratory at Sotik Tea Company using the miniature FBD Sherwood Tornado model 501. It took 20 minutes experimental time to lower the dhool moisture from 72% to 3.5%. Experimental data was used to develop black tea drying curve and drying rate.  The Box Behnken design under response surface design methodology in Minitab software was used to analyze and optimize the black tea drying variables. The optimum variables were found to be at hot air temperature of 100 0C, hot air velocity of 0.38 m/s and drying time of 12.9 minutes. These drying parameters resulted in a more acceptable black tea moisture content of 3.5% db which falls between the acceptable black tea moisture content of 3% db to 4% db.

Downloads

Download data is not yet available.

References

Akbulut, A., and Durmuş, A. (2010). Energy and exergy analyses of thin layer drying of mulberry in a forced solar dryer. Energy, 35(4), 1754-1763. https://doi.org/10.1016/j.energy.2009.12.028 DOI: https://doi.org/10.1016/j.energy.2009.12.028

Akhtaruzzaman, M., Ali, M., Rahman, M., and Ahamed, M. (2013). Drying tea in a kilburn vibro fluid bed dryer. Journal of the Bangladesh Agricultural University, 11(1), 153-158. https://doi.org/10.3329/jbau.v11i1.18227 DOI: https://doi.org/10.3329/jbau.v11i1.18227

Akpinar, E. K., Bicer, Y., and Yildiz, C. (2003). Thin layer drying of red pepper. Journal of Food Engineering, 59(1), 99-104. https://doi.org/10.1016/S0260-8774(02)00425-9 DOI: https://doi.org/10.1016/S0260-8774(02)00425-9

Chaudhari, A., Kostha, V., and Upadhyay, J. (2018). Optimum energy requirement of fluidized bed dryer for drying of Khoa. Int. J. Chem. Stud, 6, 40-44.

Chukwunonye, C. D., Nnaemeka, N. R., Chijioke, O. V., and Obiora, N. C. (2016). Thin layer drying modelling for some selected Nigerian produce: a review. Am J Food Sci Nutr Res, 3(1), 1-15.

da Silva Pinto, M. (2013). Tea: A new perspective on health benefits. Food research international, 53(2), 558-567. https://doi.org/10.1016/j.foodres.2013.01.038 DOI: https://doi.org/10.1016/j.foodres.2013.01.038

Das, H. J., Mahanta, P., Saikia, R., and Tamuly, P. (2021). Thermodynamic analysis in bubbling fluidized bed dryers with spiral and cone angles. Journal of Thermal Science and Engineering Applications, 13(6), 061019. https://doi.org/10.1115/1.4050568 DOI: https://doi.org/10.1115/1.4050568

Hajra, N. G. (2021). Indian tea: robust growth amid rising challenges. Journal of Tea Science Research, 11.

Handayani, S., Atmanto, I., Putri, F., and Fujiwara, S. (2020). Energy and exergy analysis economic of continuous vibrating fluidized bed drying on celery drying. Journal of Physics: Conference Series,

https://doi.org/10.1088/1742-6596/1524/1/012030 DOI: https://doi.org/10.1088/1742-6596/1524/1/012030

Handayani, S. U., Yohana, E., and Tauviqirrahman, M. (2023). Experimental study on drying characteristic of black tea using agitated vibro fluidized bed dryer. Materials Today: Proceedings.

https://doi.org/10.1016/j.matpr.2023.03.425 DOI: https://doi.org/10.1016/j.matpr.2023.03.425

Hicks, A. (2009). Current status and future development of global tea production and tea products. Au Jt, 12(4), 251-264.

Lang'at, N. K. e., Thoruwa, T., Abraham, J., and Wanyoko, J. (2016). Performance of an Improved Fluidized System for Processing Green Tea. Int. J. Mech. Aerospace, Ind. Mechatron. Manuf. Eng., 10(6), 1088-1093.

Özahi, E., and Demir, H. (2013). A Case Study on the Drying Performance of Batch Type Fluidized Bed Dryers at Constant Drying Temperatures. Proceedings of the 12th International Conference on Signal Processing, Robotics and Automation (ISPRA'13)-Recent Advances in Circuits, Communications and Signal Processing, ISBN,

Panda, B. K., and Datta, A. K. (2016). Quantitative analysis of major phytochemicals in orthodox tea (Camellia sinensis), oxidized under compressed air environment. Journal of Food Science, 81(4), C858-C866. https://doi.org/10.1111/1750-3841.13265 DOI: https://doi.org/10.1111/1750-3841.13265

Pou, K. J., Paul, S. K., and Malakar, S. (2019). Industrial processing of CTC black tea. In Caffeinated and cocoa based beverages (pp. 131-162). Elsevier. https://doi.org/10.1016/B978-0-12-815864-7.00004-0 DOI: https://doi.org/10.1016/B978-0-12-815864-7.00004-0

Sarker, M. S. H., Ibrahim, M. N., Aziz, N. A., and Punan, M. S. (2015). Energy and exergy analysis of industrial fluidized bed drying of paddy. Energy, 84, 131-138. https://doi.org/10.1016/j.energy.2015.02.064 DOI: https://doi.org/10.1016/j.energy.2015.02.064

Singh, R. P., and Heldman, D. (2009). Introduction to Food Process Engineering.

Stodt, U. W., Blauth, N., Niemann, S., Stark, J., Pawar, V., Jayaraman, S., . . . Engelhardt, U. H. (2014). Investigation of processes in black tea manufacture through model fermentation (oxidation) experiments. Journal of Agricultural and Food Chemistry, 62(31), 7854-7861. https://doi.org/10.1021/jf501591j DOI: https://doi.org/10.1021/jf501591j

Tasirin, S., Kamarudin, S., Ghani, J., and Lee, K. (2007). Optimization of drying parameters of bird's eye chilli in a fluidized bed dryer. Journal of Food Engineering, 80(2), 695-700. https://doi.org/10.1016/j.jfoodeng.2006.02.032 DOI: https://doi.org/10.1016/j.jfoodeng.2006.06.030

Temple, S., and Van Boxtel, A. (1999). Fluidization of tea. Journal of agricultural engineering research, 74(1), 5-11. https://doi.org/10.1006/jaer.1999.0421 DOI: https://doi.org/10.1006/jaer.1999.0421

Downloads

Published

2024-11-14

How to Cite

Otedo, B. O., Cherop, P. T., & Osore, E. E. (2024). Optimization of Drying Parameters for Minimization of Moisture Content in Black Tea Production. SCIENCE MUNDI, 4(2), 198–210. https://doi.org/10.51867/scimundi.engineering.4.2.18